Module 1: The Map
Before any editing, you build the map: a surface photo that can carry the effect, a numbered 12-tile grid drawn over it, and a transparent mortar overlay that keeps the tile lines dark forever. A good map makes every later module easy; a sloppy map cannot be rescued downstream.
Pick a surface photo that works
Your surface photo does two jobs: it is the opening and closing picture, and its joints become the lines your viewers read as tiles. Choose for the second job first. You want big tiles — large stones, bricks, or slabs that fill the frame generously — because small, busy surfaces turn to noise once video starts moving inside them. You want strong dark joints: deep shadow lines between stones, dark grout between tiles, clear gaps between bricks. Those joints are what the mortar overlay will trace.
Run the phone test before you commit. Shrink the photo to phone size, or hold it at arm’s length, and look once. Can you still see the individual stones and the dark lines between them? If the surface melts into gray texture at small size, it will not read as tiles in a feed, where most people will meet your video on a phone. Flat, even light beats dramatic light here: harsh shadows that cut across stone faces will later look like extra tile lines, and viewers cannot tell the fake lines from the real ones.
For Harbor Morning, the surface is a cobblestone harbor photo: big rounded stones, dark gaps between them, shot straight on in soft morning light. It passes the phone test easily. Your own photo should be shot or chosen the same way — straight on where you can, evenly lit, and cropped to 1920×1080 before it enters CapCut, so the photo you map is exactly the photo in your project.
On your phone: you can shoot the surface photo on your phone and send it to your computer. Just check it at small size on the phone first — that is the phone test, done where it matters.
Build the grid and number your tiles
The Grid Starter divides your photo into 12 equal tiles: 4 columns by 3 rows on the 1920×1080 frame, so each tile is 480×360 pixels, 25% of the frame wide and 33.3% of the frame tall. In CapCut, start a project at 1920×1080 and 30fps, place the surface photo on the main track, and stretch it to fill the whole timeline — it is the base that never leaves. Then do your numbering on paper or in a notes file, not in the app: this course numbers tiles left to right, top to bottom, so the top row is tiles 1, 2, 3, 4; the middle row is 5, 6, 7, 8; the bottom row is 9, 10, 11, 12.
Your tile map — 12 tiles
Learn the map by landmarks, not just numbers. Tiles 7 and 8, the two center-right tiles in the middle row, are Harbor Morning’s subject block — the boat lands there. The four corner tiles, 1, 4, 9, and 12, hold sky and water with no subject in them; those are dead zones, and Module 4 will park the guest scene there. When a later lesson says “tile 10,” you should see bottom row, second from left, without counting.
Keep this numbered map beside you for the whole build. Every schedule, mask position, and click in the course is written against these twelve numbers. Editors who skip the paper map end up hunting through overlay tracks trying to remember which copy is which — the map is the difference between a routine and a riddle.
Make the mortar overlay in Photopea, then proof the map
The mortar overlay is a transparent PNG carrying only the dark grid lines, and it sits on the top overlay track for the whole video, so the separation between tiles never washes out over bright footage. Make it free in Photopea in your browser. Open your surface photo, add a new layer, and draw the grid on that layer: vertical lines at 25%, 50%, and 75% of the width, horizontal lines at 33.3% and 66.7% of the height, in near-black, a few pixels thick. Hide the photo layer, and export the line layer alone as a PNG with transparency. That file is your mortar.
The mortar rule
In CapCut, import the PNG, place it on the topmost overlay track, and stretch it across the full timeline, above everything you will ever add. It never moves and never gets trimmed. Now the proof, and do not skip it: play the photo with the grid and mortar in place and check every line. In the Grid Starter, each line must sit exactly on your drawn grid — straight, even, and crossing no tile face at an angle. If a line looks doubled, soft, or off its mark, fix the PNG now, while the fix costs two minutes.
This green-check moment is the course’s first quality gate: no line crosses a tile face, no line is missing, the corners meet cleanly. Only a proofed map earns editing time. Module 3 builds twelve masked copies against these lines, and every one of them trusts that you checked.
On your phone: Photopea runs in a phone browser too, but drawing straight lines is fiddly on a small screen. Make the PNG on a computer if you can, then import it into the phone app as an overlay like any other file.
You are choosing between two surface photos. Photo one has tiny, tightly packed mosaic pieces in soft gray. Photo two has big cobblestones with deep, dark gaps. Which one do you build on, and why?
What you can now do
- Judge a surface photo with the phone test: big tiles, strong dark joints, even light, readable at small size.
- Number the 12-tile grid from memory — subject block at tiles 7 and 8, dead zones at the four corners.
- Make a transparent mortar PNG in Photopea, lay it over the whole timeline in CapCut, and green-check every line before editing.