Module 3: Build the Tiles
This is the hands-on module: the overlay and rectangle-mask workflow that turns one scene clip into twelve position-locked tiles in CapCut Desktop. Learn the routine on tile 1, repeat it eleven times, and by the end of the module Scene A’s full overlay stack stands built.
The overlay stack and the rectangle mask
Picture the stack from the bottom up. The main track holds the surface photo for the whole video. Above it, each tile is its own overlay track carrying a full-frame copy of the scene clip. Above everything, the mortar PNG from Module 1 watches over the lines. Module 5 will add click and music tracks below. Nothing else ever enters the stack, which is why a finished project stays easy to read.
The stack — every Tile Style project is built like this
Now build tile 1 of Scene A. Import Scene A’s clip, and add it as an overlay above the photo, starting where Scene A’s first tile flips on. Leave the clip full-frame — do not scale it down. Select it, open Mask, and choose Rectangle. Set the feather to 0, because a soft edge would blur the tile line you worked to proof. Size the rectangle to one cell: width 25% of the frame, height 33.3%. Then position it over the top-left cell, columns one quarter across, rows one third down. The mask shows only that cell; the rest of the full-frame clip stays in place underneath, hidden.
That last point is the whole trick. Because the copy is full-frame under the mask, the cell always shows the correct part of the scene — the top-left of the harbor in tile 1, exactly where the top-left of the harbor belongs. Tiles built this way are position-locked by construction. Never scale a clip down into a tile instead: that squeezes the entire scene into one cell, the number one beginner mistake, and Module 6 shows what it looks like.
On your phone: the same Mask → Rectangle controls live in the phone app’s overlay menu, with the same size and position fields. The steps are identical; the screen is just smaller.
The duplicate routine: move the mask, fix the trim
Tile 1 took care. Tiles 2 to 12 take routine. The loop is four steps: duplicate, move the mask, set the start, fix the trim. Duplicate tile 1’s overlay. The copy inherits the right clip, the right mask size, and feather 0 — everything except its cell and its clock. Move its rectangle mask one cell to the right, onto tile 2: same top row, second quarter across. Then drag the copy so it starts at tile 2’s flip time from your schedule — a tile flips on where its copy starts, and flips off where its copy ends. No transitions, no effects on the flip itself.
Use this position table for every cell. Columns, left to right: first quarter, second quarter, third quarter, fourth quarter. Rows, top to bottom: first third, second third, third third. Tile 1 is first quarter, first third. Tile 7 is third quarter, second third. Tile 8 is fourth quarter, second third. Tile 12 is fourth quarter, third third. The mask width never changes — always 25% by 33.3% — only its position moves.
Now the step beginners skip: fix the trim. Your duplicate still carries tile 1’s in-point, so its clock is wrong by exactly its flip delay. Apply the rule from Module 2: head trim = scene offset + flip delay. If tile 2 flips on 0.65 seconds after Scene A starts, its head goes to 0:04.0 plus 0.65 — about 0:04.7 in the raw clip. In CapCut, trim the head of the copy forward to that point while keeping its start pinned at the flip time: shorten from the head, then slide the copy back to its schedule position if the start moved. Check the number, not the look — clocks are arithmetic, not vibes.
Finish Scene A’s stack and check it tile by tile
Work the routine down your flip schedule until Scene A has twelve overlays, one per tile, each starting at its scheduled flip time, each head-trimmed by its own delay. Name or order the overlay tracks to match tile numbers as you go — top overlay for tile 1, next for tile 2 — whatever order you choose, keep it consistent, because Module 4 stacks Scene B’s copies the same way and you will navigate this stack by number for the rest of the build.
Then run the tile-by-tile check before you call it done. Scrub to a moment after 9.0 seconds, when every tile of Scene A has flipped on, and compare the frame against the raw scene at the matching moment. Boats, waterline, and masts should continue across tile borders as if no grid existed — the mortar lines draw the grid, the picture ignores it. Pick three tiles at random, read their head trims off your schedule, and confirm the numbers on the clips match: a tile flipping at 2.0 seconds into the scene reads 0:06.0, and one at 3.5 seconds reads 0:07.5.
Also check the flip edges themselves. Step through two or three flips frame by frame: the tile should change in a single frame, with the mortar steady over the join and no stray frame of photo or squeezed footage in between. If a tile lags, its copy starts late; if it shows the wrong moment, its trim is off. Both fixes live in this module’s routine, and both are cheap now and expensive after Scene B stacks on top.
On your phone: twelve overlay tracks is the practical phone ceiling, and Scene A alone uses twelve. On a phone, finish and check one scene’s stack before starting the next, exactly as this lesson does on desktop.
You finish Scene A and press play. Every tile shows the whole harbor squeezed into a small rectangle, like twelve tiny televisions. What went wrong?
What you can now do
- Build a tile the right way: full-frame scene copy on an overlay track, Mask → Rectangle at 25% by 33.3%, feather 0, positioned on its cell.
- Run the duplicate routine — duplicate, move the mask by the position table, set the start at the flip time, fix the head trim to scene offset plus flip delay.
- Verify a finished scene stack tile by tile: picture continuous across borders, trims matching the schedule, flips landing in a single frame.