Fluent Collective / courses
0-day streak 0 XP Explorer rank
← Tile Style Edit in Premiere Pro

Module 5: Clicks, Music and Export

Sound is half the illusion: a flip without a click feels like a glitch, and a click without a flip feels like a mistake. This module records your two clicks, places one per flip, sets music underneath, and exports a piece that loops cleanly.

Record your two clicks

You need exactly two sounds. The first is a bright, short tick for ordinary flips: tap a fingernail on a stone, a ceramic mug, or a tiled counter and record it on your phone, close and dry, with no room echo. The second is a deep knock for the subject landing: knock once on solid wood with a knuckle. Record ten takes of each, because most takes will carry a shuffle, a breath, or a second faint tap. Trim the single best take of each down to just the hit and a whisper of decay.

Recording your own sounds is not just frugality. Library click sounds can carry license limits when the video is client work, and a license question discovered after delivery is an ugly surprise. Your own recorded tick and knock are yours for every project, forever, and they also tend to match the surface on screen, because you can tap a material close to the one in your photograph. Harbor Morning's tick was tapped on a real stone, which is why it sits so comfortably under cobblestone flips.

Bring both sounds into Premiere and place them on audio tracks A3 and A4 of the main sequence, away from music and any scene audio. Name the clips plainly, Tick and Knock, and keep a copy of each in your project folder outside Premiere as well. Every later step in this module is placement and counting, so clean, trimmed, clearly named sounds are the foundation. If a take sounds watery or doubled, re-record it now; no amount of mixing fixes a bad source hit.

One click per flip, counted

The placement rule has no exceptions: exactly one click per tile flip, sitting on the exact frame where the tile changes. A flip on is a click. A flip off, when a tile returns to the photograph or a guest tile leaves, is also a click. Place the bright tick for ordinary flips and reserve the deep knock for one moment only, the subject block landing. In Harbor Morning that knock lands at 16.2 seconds, when all four block tiles flip on a single frame, and one knock serves the whole block because the block is one event.

Harbor Morning — the full 28 seconds

PHOTOSCENE A — WAVE INSCENE B — SNAKE IN · SUBJECT LASTC VISITS AS GUEST TILESFLIP BACKPHOTOEach tick below the bar is one flip — and one click. Notice the spread: flips run across the whole life of each scene,never in one burst followed by a frozen picture. The deep subject knock lands at 16.2s, inside Scene B.
The worked example's timeline. Your own pieces copy this shape: photo, wave in, snake in with the subject last, a guest visit, flip back, hold.

Work from your flip schedule, not from memory. Go through the schedule row by row and drop a click at each listed time on A3, using A4 wherever two flips share a frame and need separate clips. Then run the count check: count the flips in the schedule, count the click clips on the timeline, and compare. The numbers must match. This simple count catches the two classic errors, a flip you forgot to give a voice and a stray click left behind after a timing change.

Watch the piece once with your eyes closed. You should hear the choreography: the steady sweep of the wave, the winding rhythm of the snake, one deep knock, the small visit, and the closing circle. If you hear a click with no visible partner, or see a flip pass in silence, stop and reconcile the count before moving on. Sound placed from the schedule, then verified by count, then verified by ear: that order keeps this step short and reliable.

Music underneath, export, and the loop check

Music goes under the clicks, never over them. Place your track on a lower audio track and set its level so the clicks stay crisp and present at normal listening volume. The test that matters is a phone speaker in a normal room, not studio headphones: play the export there and listen for two things. Every click should be easy to hear, and the music should feel like a floor the piece stands on, not a blanket over it. If the knock at the subject landing does not register as deeper than the ticks, lower the music a touch more.

Export from the main sequence at the project's own settings: 1920 by 1080, 30 frames per second, matching the sequence you built. Export the full 28 seconds, including the bookends: the untouched photograph holding from 0.0 to 1.2 seconds at the open, everything flipping back by 27.0, and the final photograph holding from 27.0 to 28.0. Those quiet bookends are not padding. They are what let the piece loop, because the last frame and the first frame are the same photograph.

Run the loop check on the exported file itself, not inside Premiere. Play it in a player that repeats, and watch the join twice. The photograph should hold, the wave should begin, and nothing should jump, flash, or shift at the seam. Also confirm no tile rewinds anywhere in the piece: footage inside tiles only ever plays forward, including guest clips, which pause off screen and resume. A clean loop and a forward-only check mean Harbor Morning is ready to ship or to post.

The sound law for Tile Style is : every flip, on or off, gets exactly its own sound on the exact frame it changes.

What you can now do

  • Record and trim a bright tick for ordinary flips and a deep knock for the subject landing.
  • Place one click per flip from the schedule and prove it with the count check: clicks equal flips.
  • Set music under the clicks, export at 1920 by 1080 and 30fps, and pass the loop check on the exported file.