Fluent Collective / courses
0-day streak 0 XP Explorer rank
← Tile Style Edit in Premiere Pro

Module 1: The Map

Every Tile Style piece stands or falls on its map: the surface photo, the grid drawn over it, and the mortar overlay that keeps the tiles separated. This module builds all three and proves them before you edit a single clip.

Pick a surface photo that works

A good surface photo does half your work for you. Look for big, clear shapes: chunky cobblestones, wide bricks, or large floor tiles that stay readable when the finished video plays on a small phone screen. Tiny mosaic pieces may look beautiful as a photograph, but at video size they turn to noise, and each one would need its own crop later. Big shapes keep the build manageable and the result bold.

The joints matter as much as the tiles. You want strong, dark lines between the shapes, with real contrast against the tile faces. Pale grout on pale stone washes out the moment bright footage plays underneath, and the whole piece stops reading as tiles. Check the photo at phone size, not full screen. If you cannot trace the pattern with your eyes at that size, your viewers will not be able to either, so keep looking.

The photo also needs to sit still and square. A straight-on or gently angled shot works best for the Grid Starter, because your 6 by 4 grid has to sit believably over it. Harbor Morning uses a cobblestone harbor photo shot from standing height: the stones are large in the foreground, the joints are nearly black, and the pattern still reads clearly in the top half of the frame where the first flips will land. Reject photos with heavy blur, deep shadows cutting across the pattern, or a subject already printed on the surface. Clean and plain wins.

Build the grid and number your tiles

The Grid Starter divides your 1920 by 1080 frame into 6 columns and 4 rows, giving you 24 tiles. Each tile is exactly 320 pixels wide and 270 pixels tall. That fixed size is the whole reason the Crop math in Module 3 works, so do not nudge the grid to hug an awkward photo. Resize or reposition the photo under the grid instead, until the pattern sits comfortably inside the frame.

Draw the grid where you can see it. In Photopea or any simple editor, place your photo on one layer, add a layer above it, and draw the vertical lines at every 320 pixels and the horizontal lines at every 270 pixels. Keep the lines thin and bright, a color the photo does not contain, so every line stands out while you check it. This drawn grid is a working tool, not part of the finished video.

Now number the tiles, because every later step talks in numbers. Number left to right, top to bottom, from 1 to 24. Tile 1 is top left, tile 6 is top right, tile 7 starts the second row, and tile 24 is bottom right. Write the number inside each cell on your grid layer. Harbor Morning's worked tile is number 14, sitting in row 3, column 2 of the numbering. When your flip schedule in Module 2 says tile 14 flips at 3.5 seconds, you need to find that cell in one glance, every time, without counting on your fingers.

Your tile map — 24 tiles

123456789101112131415161718192021222324
Number tiles left to right, top to bottom, 1–24. Every plan, crop value, mask position, and click in this course refers to these numbers. Print this page or screenshot it and keep it next to your timeline.

Make the mortar overlay and run the green check

The mortar overlay is a transparent PNG that carries only the dark grid lines, and it sits on the top track for the whole video. Without it, bright footage bleeds across the cell edges and the tiles melt together. To make it, open your gridded image in Photopea, add a fresh transparent layer, and draw the same 6 by 4 lines in a near-black color, a few pixels thick. Hide the photo layer, then export the line layer alone as a PNG with transparency. Name it clearly, because you will import it into every project.

The mortar rule

INSIDE EACH TILE: CLEAN FOOTAGE, NOTHING PRINTED OVER ITTHE MORTAR LINE — A FIXED DARK OVERLAY, IDENTICAL IN EVERY FRAMEPainted on top at the end. Its darkness never depends on the footage underneath,so bright scenes cannot wash it out — the failure that kills most first attempts.
Two layers do two jobs: footage fills each tile edge to edge, and one fixed dark-line overlay rides on top for the whole video.

Before any editing, run the proof this course calls the green check. Place the numbered grid over your photo at full size and inspect every line, cell by cell. Each line must sit on a real joint in the photo or exactly on your drawn grid line, and no line may cross through the face of a tile. A line crossing a face means your grid and your photo disagree, and that disagreement will show as a sliced stone in the finished piece.

Fix problems now, while fixing is free. Shift the photo a few pixels, scale it slightly, or choose a different crop of the same surface until every line behaves. In Harbor Morning, the first placement put one vertical line straight through a pale foreground stone, so the photo moved 20 pixels left and the line landed in the joint where it belonged. Ten minutes of checking here saves a rebuild in Module 6. When every line passes, your map is proven and you may build on it.

During the green check, one grid line crosses straight through the face of a large stone. What do you do?

What you can now do

  • Choose a surface photo with big tiles and strong dark joints that still reads clearly at phone size.
  • Draw the 6 by 4 grid of 24 tiles at 320 by 270 pixels each and number every tile from 1 to 24.
  • Export a transparent mortar PNG in Photopea and green-check every line before any editing begins.