Module 3: Build the Tiles
This is the hands-on Premiere module. You will build one nested sequence per scene, called a field, fill it with 24 cropped copies using the Crop effect, and finish with Scene A's field built and flipping on the main timeline.
Fields: one nested sequence per scene
Premiere's Tile Style unit is the field: a nested sequence that holds everything belonging to one scene. Create a sequence at 1920 by 1080, 30 frames per second, and name it Field A. Inside it, place your surface photograph on the lowest video track and stretch it across the whole length of the field. That photograph is what shows wherever no tile has flipped on yet, and it is also what a tile reveals when it flips back off.
The stack — every Tile Style project is built like this
Above the photograph you will stack the 24 cropped copies of Scene A, each trimmed to start at its scheduled flip-on time and to run to the end of the field, or to its scheduled flip-off time if it has one. Twenty-four stacked copies sounds heavy, but each copy is the same clip wearing a different crop and a different start time, and Premiere handles the stack comfortably. Keep the field tidy from the first copy: label each clip with its tile number as you place it.
Fields stack on the main timeline, and that stacking is how scene changes work. On your main sequence, Field A sits on a lower track and Field B sits above it. When Field B's tiles flip on, they cover Field A a tile at a time, so the new scene appears to replace the old one across the surface. Clicks live on audio tracks A3 and A4 of the main sequence, kept separate from any music. Build one field completely before starting the next; mixing two half-built fields is where numbers get crossed.
The Crop table and worked tile 14
Each tile is made with the Crop effect, found under Effects, then Video Effects, then Transform, then Crop. Drag it onto a full-frame copy of the scene clip. Leave the Zoom checkbox off, always. With Zoom off, Crop cuts away everything outside one cell while the picture underneath stays at full frame size, so the cell shows the correct slice of the scene. With Zoom on, Premiere stretches the remaining slice to fill the frame, which ruins the position lock.
The four numbers come from the tile's column and row. For a tile in column c, counting 0 to 5 from the left, Left is c times 16.667 percent and Right is 5 minus c, times 16.667 percent. For a tile in row r, counting 0 to 3 from the top, Top is r times 25 percent and Bottom is 3 minus r, times 25 percent. Each step across removes one tile width, 320 pixels of 1920, which is where 16.667 percent comes from. Each step down removes one tile height, 270 of 1080, exactly 25 percent.
Work tile 14 in full, the way you will work all 24. Tile 14 sits at row 3, column 2 in the course numbering. Its numbers are Left 33.3 percent, Right 50 percent, Top 50 percent, and Bottom 25 percent. Check the logic once: left and right together remove five of the six columns, leaving exactly one column visible, and top and bottom together remove three of the four rows, leaving exactly one row. When the four numbers always add up that way, every tile is exactly one cell, never more and never less.
The duplicate routine: build tile 1, copy it 23 times
Never build 24 tiles from scratch. Build tile 1 perfectly, then duplicate it. For tile 1, place a copy of Scene A in Field A, set its source in-point from your flip schedule, trim its start to the scheduled flip-on time, apply Crop, and enter its four numbers: Left 0 percent, Right 83.3 percent, Top 0 percent, Bottom 75 percent. Play the field and confirm that only the top-left cell shows moving footage, in the right place, at the right moment. Tile 1 is your template, so spend the extra minute proving it.
Now the routine repeats. Hold Alt and drag the finished clip to a fresh track above, which duplicates it with its effect and trims intact. For the duplicate, change only five things: the four Crop numbers for the new tile, and the in-point, shifted per the one-clock rule to match the new tile's flip-on time, with the clip start moved to that same time. Rename the duplicate to its tile number before you touch the next one. Working left to right across a row, then dropping to the next row, keeps the pattern easy to follow and easy to audit.
Scene A flips in as a wave from 1.2 to 9.0 seconds, so its 24 start times sweep steadily across the grid. When all 24 copies are placed, play Field A inside the main sequence. You should see the photograph come alive cell by cell, every cell showing its correct slice of one shared harbor moment, with no cell squeezed, repeated, or late. That is Scene A's field, built. Fields B and C in the next module follow this identical routine, only their schedules and choreography change.
You play back your field and every tile shows the entire harbor squeezed into its small cell, like 24 tiny complete pictures. What went wrong?
What you can now do
- Build a field: a nested sequence holding the photograph plus one scene's 24 cropped copies, stacked on the main timeline.
- Set any tile's Crop numbers from its column and row, with Zoom off, and work tile 14 from memory.
- Use the duplicate routine: perfect tile 1, Alt-drag it, then change four crop numbers and the in-point for each new tile.